This page answers the questions that SpeedCrunch users ask most often. For more detail, see the User Guide. You can also open the manual in the app by pressing F1, or choosing Help → User Manual.
Note
On macOS, use Cmd where this page says Ctrl.
SpeedCrunch is a fast, high-precision scientific calculator for your desktop. You type a whole expression on the keyboard and press Enter. It shows the result and keeps a full history of your work.
Yes. SpeedCrunch is free and open source, under the GNU GPL version 2. There are no ads and no paid features.
Windows: 64-bit Windows 10 (version 1809 or later) or Windows 11
macOS: macOS 14.4 (Sonoma) or later
Linux: most distributions, with X11 or Wayland
Probably. SpeedCrunch is translated into more than 40 languages. Change it in Settings → Language.
SpeedCrunch is a calculator, not a full math program. It does not draw graphs, solve equations, or do symbolic algebra (for example, derivatives or integrals in symbolic form).
Download it from speedcrunch.org.
Windows: use the installer, or the portable .zip version.
macOS: open the disk image and drag SpeedCrunch to Applications.
Linux: install it from your distribution (for example
sudo apt-get install speedcrunch or sudo dnf install speedcrunch), or
from Flathub.
It is a Windows version that needs no installation. Unzip it and run
speedcrunch.exe. It saves all settings and data in its own folder, so you can
copy it to a USB stick and use it on another computer.
Only continue if you downloaded SpeedCrunch from the official website.
Try to open SpeedCrunch once.
Open System Settings → Privacy & Security.
Under Security, click Open Anyway next to SpeedCrunch.
Confirm. macOS remembers your choice.
Not the current version. Use SpeedCrunch 0.12 from the “Older Versions” part of the download page.
Official builds check for updates automatically, at most once a week. You can also check yourself with Help → Check for Updates. On Linux, your package manager or Flathub usually handles updates.
Type the expression and press Enter. For example:
54*(4.514 - 5.7)= -64.044
SpeedCrunch uses a semicolon (;) to separate arguments, not a comma:
average(12; 34; 56)= 34
The comma can be a decimal separator, so it cannot also separate arguments.
Use ans. It always holds the last result:
2+3= 57*ans= 35
Tip: If you start a new line with an operator such as +, -, * or /,
SpeedCrunch adds ans for you. Type +3 and you get ans+3.
Press Up and Down in the input field to go through earlier expressions.
Double-click any line in the result area to copy it into the input field.
6/2(2+1) equal to 9 and not 1?¶Implicit multiplication (no * sign) has the same priority as * and /.
SpeedCrunch works from left to right: 6/2 = 3, then 3*(2+1) = 9.
The result area shows how SpeedCrunch read your expression, so you can always
check it. Use parentheses if you mean something else: 6/(2(2+1)).
2^2^3 equal to 256?¶Powers are calculated from right to left: 2^(2^3) = 2^8 = 256.
% divides by 100. With + and -, the percentage is taken from the number
on the left:
1000 + 12% = 11201000 - 12% = 8801000 * 12% = 120
Use a question mark. Everything after ? is ignored:
1 + 2 ? simple sum? this whole line is a comment
Use e for “times 10 to the power of”: 1.234e-9 means 1.234 × 10⁻⁹.
SpeedCrunch accepts huge exponents, like 1e+500000000, without overflow.
It stores about 78 significant digits for each number. This is much more than most calculators. You can show up to 50 decimal places.
Use the precision selector in the status bar (View → Status Bar, or Ctrl+B), or Settings → Results → Notation & Precision….
Choose Rational notation in the status bar or in
Settings → Results → Notation & Precision…. Or use rat() for a single
result:
rat(0.75)= 3/4
In Rational mode, common trigonometric results are shown in exact form, such
as pi/2 or √(2)/2.
Use the notation selector in the status bar, or the function keys:
Key |
Notation |
|---|---|
F2 |
Automatic decimal |
F3 |
Fixed-point decimal |
F4 |
Engineering |
F5 |
Scientific |
F7 |
Octal |
F8 |
Hexadecimal |
F9 |
Sexagesimal (degrees/time with minutes and seconds) |
F10 |
Binary |
To format only one result, use sci(), eng(), hex(), bin(), oct() or
dec().
Yes. Open Settings → Results → Notation & Precision… and turn on one or more of the four extra result lines. Each line can have its own notation and number of decimal places.
Yes. When you type, SpeedCrunch accepts both a dot and a comma as the decimal point. To choose how results look (decimal mark and digit grouping), use Settings → Number Format….
3.140?¶Turn on Settings → Results → Remove Trailing Zeroes.
Yes, in Settings → Results → Rounding Mode. You can choose normal
rounding, banker’s rounding, truncation, round up or round down. This only
changes how results look. To round a value inside a calculation, use
round(), roundeven(), trunc(), ceil() or floor().
Use name = value:
mass = 120g = 9.81weight = mass*g= 1177.2
You can add a description with ?: g = 9.81 ? gravity.
f(x) = 5*x + 8f(5)= 33
For more parameters, use semicolons: f(x; y) = x*y + x.
Open the User Variables (Ctrl+4) or User Functions (Ctrl+5) panel. Select the item and press Delete, or use the right-click menu.
Yes. Put them in Settings → User Definitions…, one per line. They are loaded into every session. Click Validate to test them and Apply to use them.
Put units in square brackets after a number:
5[ft]= 1.524 m
In version 0.12, units were plain names, like variables. This caused problems:
Name clashes. Every SI prefix could go with every unit, so many short
names were already taken, for example mg, cm, ms, ns, pm, Pa and
kt. Few short names were left for your own variables.
No standard symbols. Many units had to use English names, like
second. With brackets, you can write standard symbols, like [s], [m]
and [km/h].
No real unit system. Now units are a separate thing, not just variables.
Mixed suggestions. Autocomplete showed units together with functions
and variables. Now, inside [ ], it suggests only units.
No custom units. With brackets, you can create your own units, like
[mpg] (see Can I create my own units?).
With brackets, names like a, l, m and mg are free again for your own
variables.
Yes, a few things help:
Type [ and SpeedCrunch adds the ] for you at the end of the expression.
Inside brackets, autocomplete suggests unit names. Press Tab to accept.
Write a whole unit in one bracket: [km/h] instead of [km]/[h].
Add a button that inserts [ to a custom keypad
(Settings → Edit Custom Keypad…).
No, there is no option for this. But you can get close with your own variables. Open Settings → User Definitions… and add the units you use often, one per line:
km = 1[km]h = 1[h]kg = 1[kg]
Now 100 km / (2 h) works without brackets. Results are shown in SI units,
so this gives 13.8888… m/s. To get another unit, you still need brackets
for the conversion target: 100 km / (2 h) -> [km/h] gives 50 km/h.
If you really prefer the old style, SpeedCrunch 0.12 is still in the “Older Versions” part of the download page. But it will not get new features or fixes.
Use -> or in:
10[kn] -> [km/h]= 18.52 km/h77[°F] in [°C]= 25 °C
SpeedCrunch checks dimensions. Time and length cannot be converted into each other, so it shows an error. This protects you from mistakes.
Put the value and the unit in parentheses: (2[m])^2. To enter two square
meters, write 2[m^2]. SpeedCrunch rejects 2[m]^2 because it is not clear.
Yes. Put the new name in brackets on the left:
[earth_radius] = 6371[km]1[au] in [earth_radius]
This is very useful for units that SpeedCrunch does not have. For example, to convert car fuel use from miles per gallon to liters per 100 km:
[mpg] = 1[mi/gal_us][L100km] = 1[L] / 100[km]1 / (40[mpg]) -> [L100km]= 5.88036458333333333333 L100km
To keep your units in every session, add them to Settings → User Definitions….
See the units reference. Unit names use
American English and the singular form, for example meter and foot.
Use the angle selector in the status bar, or Settings → Angle Mode. You can also write the unit in the expression. Then the angle mode does not matter:
cos(180[deg])= -1
Yes, always. Use i or j:
(5+3j)/(8-2j)= 0.5+0.5j
Note: 5j means 5*j, but j5 is a variable name. You can change the
symbol and the display form (rectangular, polar, and so on) in
Settings → Results.
(-8)^(1/3) a complex number and not -2?¶Fractional powers give the principal complex root. For a real root, use
cbrt(-8) = -2, or root(3; -8) = -2.
Use a prefix: 0b for binary, 0o for octal, and 0x or # for hex:
0xFF + 0b101= 260hex(255)= 0xFF
Bitwise operators also work: & (and), | (or), ~ (not), << and >>
(shifts). The Bit Field panel (Ctrl+8) lets you click single bits.
bin(-1) shown as -0b1 and not as all ones?¶SpeedCrunch shows the sign and the value separately. It does not use two’s
complement. Use mask() to get the two’s complement form, for example
mask(-1; 8).
Yes. Use : for time and ° for angles. Minutes can be more than 60:
12:90= 13:30:00
Tip: Type @ to get the ° sign.
Yes, for example average, median, stdevs, stdevp, vars, ncr,
npr, binompmf and poicdf. To sum an expression, use summation:
summation(1; 10; 2+n)= 75
Yes. Use braces and semicolons:
det({{1; 2}; {3; 4}})= -2{1; 2; 3} + {4; 5; 6}= {5; 7; 9}
Other functions include dot, cross, inv, transpose and rank.
A few examples:
molmass(C6H12O6) gives the molar mass of a chemical formula.
datetime() and epoch() convert between Unix time and dates.
ieee754_double_encode() and similar functions show how computers store
floating-point numbers.
randint(1; 6) gives a random whole number.
Open the Functions panel (Ctrl+3) to see all of them.
Press Ctrl+K and type a name, like speed of light. Press Enter to
insert it. You can also open the Constants panel (Ctrl+2). Common
constants like pi and e are always available by name.
Yes. SpeedCrunch saves your sessions automatically. When you start it again, your windows, tabs and history come back.
Yes. Move the mouse over the calculation and click the edit icon. Change the expression and confirm. SpeedCrunch then recalculates every line below it. (Hover highlighting must be on: Settings → Appearance → Hover Highlighting.)
Press Ctrl+L, or use Edit → Clear History. Your variables and functions stay. To remove everything in the session, including variables, use Session → Reset.
Yes.
Ctrl+T opens a new tab.
View → Split shows two or more sessions next to each other.
Session → New Window opens a new window.
You can drag tabs between panes and windows.
A private tab is not saved to disk. When you close it, its content is gone. Open one with Ctrl+Shift+N. To keep it after all, choose Session → Keep.
Yes. Press Ctrl+Shift+T or use Session → Reopen Closed Tab. (This does not work for private tabs.)
Up to 1000 per session by default. When the history is full, the oldest lines
are removed. Change the limit in Session → History Size Limit…. Use 0
for no limit.
Use Session → Open Sessions Folder. This is useful for backups.
Open Settings → Appearance → Theme…. Choose a light or dark theme, or change single colors to make your own. You can import and export themes as JSON files.
Yes. Use Settings → Appearance → Style Presets:
Classic looks similar to version 0.12 and uses your system style.
Modern uses the SpeedCrunch theme everywhere.
Hybrid is like Classic, but the panels use the SpeedCrunch theme.
Hold Ctrl and turn the mouse wheel, or press Shift+Up and Shift+Down. To choose a different font, use Settings → Appearance → Input and Results → Font….
Use View → Keypad. You can choose Basic, Scientific (wide), Scientific (narrow), Custom, or Disable. Change the keypad size with Settings → Appearance → Keypad → Zoom.
Yes. Choose Settings → Edit Custom Keypad…. Set the number of rows and columns, then choose what each button does. You can start from one of the built-in layouts. Click OK to save and use the layout. Later, choose View → Keypad → Custom to select it again.
Yes, since version 1.2. Open Settings → Keyboard Shortcuts, click the box next to an action, and press the new keys.
Turn on Settings → Window → Always on Top. This option is not available on Linux with Wayland.
Yes. Hold Ctrl+Shift and turn the mouse wheel.
By default, it brings the open window to the front. You can change this in Settings → Window → On Subsequent Launch, to open a new window or a new tab instead.
Use Settings → Reset All Settings…. Your history, sessions and user definitions are not deleted.
Autocomplete: Start typing a function or variable name and press Tab to complete it.
Function help: Put the cursor on a function name and press F1 to open its manual page.
Parameter hints: While you type a function, SpeedCrunch shows its parameters and highlights the current one.
Live preview: You see the result while you type. Select part of an expression to see the result of only that part.
Copy the last result: Press Ctrl+R. To copy every new result automatically, turn on Settings → Results → Copy New Results Automatically.
Wrap in parentheses: Select part of the expression and press Ctrl+(. With no selection, the whole expression is wrapped.
Formula Book: Press Ctrl+1 for ready-made formulas from algebra, geometry, electronics and radio frequency.
Keep the expression: Turn on Settings → Editing → Keep Expression After Evaluation to change and re-run the same expression quickly.
Clear with Escape: Turn on Settings → Editing → Escape Clears Editor.
Paste many lines: Paste several lines at once and each line is calculated.
Readable numbers: You can type 1 000 000 or 1_000_000. The spaces and
underscores are ignored.
Copy a whole calculation: Right-click a calculation and choose
Copy → Calculation as Single Line, for example 120 / 8 = 15.
Powers made easy: ** works like ^, so 2**10 = 1024.
Full screen: Press F11.
Keyboard only: Press F6 to move between the input field and the panels without a mouse.
SpeedCrunch adjusts your input, for example it adds closing brackets and turns
* into ×. To type exactly what you want, turn off
Settings → Editing → Automatic Input Adjustments.
Change Settings → Editing → Up/Down Arrow History to Never or Only for Single-Line Expressions.
Another program may use this shortcut. Choose a different key for Search Constants in Settings → Keyboard Shortcuts.
Use the issue tracker. Please include the report from Help → App Diagnostics. Click Copy to Clipboard and paste it into your issue. You can also ask there for new formulas in the Formula Book.